Pergola Kit with Mosquito Net for 4x4 Wood Posts
$872 USD
SKU: SP40808BK-MN
PERGOLA KIT WITH MOSQUITO NET FOR 4x4 WOOD POSTS
Make sunscreen the only spray you need this summer by adding a mosquito net pergola kit to your outdoor space. The tightly knit fabric of the netting will keep insects out of your outdoor space, allowing you to enjoy the warm weather with friends and family without any worries.
Included
INCLUDED
- 4x 4x4 SOLO base/wall brackets
- 4x 4x4 TRIO corner brackets
- 1x Mosquito Netting
- All Hardware to attach to wood is included (this includes the Side and Corner Mounts)
- 1-1/2” Pan Rob/Phil combo drive 304 S.S wood screws with black plastic head caps
NOT INCLUDED
- Wood
Shipping wood is costly. Most of the population has access to stores that sell wood locally where they live. Buying your lumber allows you the freedom to select the type of wood you want to use for your build and budget. There are also regional limitations for what kind of lumber is ideal for your build; different species of lumber would be used in tropical climate vs. a cold one. - Anchoring Hardware
Due to different building materials and requirements based on location, we advise on checking building codes and talking to your local hardware store for the best securing hardware for your specific surface.
Details
FEATURES:
- Easy Assembly
- Fabric material - PVC coated Fibreglass net with black Polyester Trim
- Tight knit to keep little bugs out
Tips
TIPS
GENERAL
- We recommend taking a bracket with you when you purchase your wood to test fit.
- Corner Mounts attach to the bottom holes of your TRIO Brackets
- Two Side Mounts will attach to each vertical post
WOOD
Our 4x4 brackets accommodate dressed lumber, commonly called 4x4’s at local building supplies. The actual measure is 3.5x3.5”.
SCREWS
- Each bracket only requires 2 screws per each side/set of eight holes.
- Insert screws in holes closest to the wood.
- Hardware to secure to wood is included.
- Additional screws are available for purchase
Instructions
SINGLE Pergola Kit with Mosquito Net BUILD
what you need
Ladder(s)
Drill(s)
Measuring Tape
4-6 People
Cardboard (to be placed under the brackets to not scratch your surface or the brackets)
LUMBER
When purchasing your lumber, always take a bracket with you to ensure a proper fit.
You can select whatever lumber suits your style and budget. It must be dry and straight.
Brackets use dressed lumber.
4”x4” (3.5”x3.5”) Bracket Cavity is
3.61”x3.61”
6”x6” (5.5”x5.5”) Bracket Cavity is 5.62”x5.62”
SCREWS
Each bracket only requires 2 screws per each side/set of eight holes.
1-1/2” Pan Rob/Phil combo drive 304 S.S Wood screws with Black plastic head caps are included
Insert screws in holes closest to the wood.
Hardware to secure to wood is included.
Additional screws are available for purchase.
SECTION 1 BUILDING THE TOP
BUILDING A ‘U’: Insert your lumber into the TRIO brackets. See figure 1.
BUILDING AN ‘I’: Insert your lumber into the TRIO brackets. See figure 2.
Secure bracket to lumber with provided screws.
SECTION 2 INSERT THE POSTS
Insert your vertical posts on the first side.
Secure bracket to lumber with provided screws.
SECTION 3 COMPLETE
Insert your lumber into side 2 to complete your pergola.
Secure bracket to lumber with provided screws.
Attach corner mounts for the Mosquito Net to your TRIO brackets. Attach corner buckles. Loop strap around corner mounts, secure with buckle and pull tight.
Line up your mounts to the placement of the other securing straps on the Mosquito net to your lumber and attach mounts to the lumber. Loop strap around corner mounts, secure with buckle and pull tight.
Anchor to your surface. Remember Anchoring hardware is NOT included as surfaces will vary from build to build. A local building supply retailer will be a helpful resource.