![](https://cdn.shopify.com/s/files/1/2568/0730/files/CMBrackets_Seal.png?v=1653685814)
Pergola Kit with Waterproof Wing Top for 6x6 Wood Posts
$1,488 USD
SKU: SP61212GR-WT
Pergola Kit with Waterproof Wing Top for 6x6 Wood Posts
This DIY pergola kit is quick and easy-to-build with a waterproof Wing Top making it the perfect addition to your outdoor space. Refer to instruction video on the tabs below for installation tips.
PLEASE READ
• Remove your Wing Top in high winds (50km/30mph) and winter.
• Do NOT use Wing Top on top of or around a source of heat or flame.
• Anchor your Pergola.
Toja Tip: Ensure lumber is fully inserted into the bracket cavity, resting on metal tabs for proper installation.
Please note: The product color may vary from the electronic representation. Every monitor or mobile display has a different capability to display colors.
Included
INCLUDED
- 4x SOLO base/wall brackets
- 4x TRIO corner brackets
- 1x Waterproof Wing Top in chosen size and colour
- 1-1/2” Pan Rob/Phil combo drive 304 S.S wood screws with black plastic head caps
NOT INCLUDED
- Wood
Shipping wood is costly. Most of the population has access to stores that sell wood locally where they live. Buying your lumber allows you the freedom to select the type of wood you want to use for your build and budget. There are also regional limitations for what kind of lumber is ideal for your build; different species of lumber would be used in tropical climate vs. a cold one. - Anchoring Hardware
Due to different building materials and requirements based on location, we advise on checking building codes and talking to your local hardware store for the best securing hardware for your specific surface.
Details
Kit Details:
- Canadian Made Brackets
- Made with powder coated steel
- All hardware, to secure to lumber, is included
- Packaged with #12x1-1/2” Pan Rob/Phil combo drive 304 S.S Wood screws
- 2-year limited warranty
- 8 fastening holes per side for attaching accessories
Shade Fabric Details:
- 100% Vinyl
- Easy to wash and keep clean
- Water-Repellant
- Strong tension straps and buckles to pull the shade tight
- 5 minutes to take down for winter / major storms
Tips
TIPS
GENERAL
WOOD
SCREWS
- Each bracket only requires 2 screws per each side/set of eight holes.
- Insert screws in holes closest to the wood.
- Hardware to secure to wood is included.
- Additional screws are available for purchase
Instructions
Pergola Kit with Waterproof Wing Top Build
What You Need
Ladder(s)
Drill(s)
Measuring Tape
4-6 People (A mechanical lift is also recommended for this build)
Cardboard (to be placed under the brackets to avoid scratching your surface or the brackets)
Lumber
When purchasing your lumber, always take a bracket with you to ensure a proper fit.
You can select whatever lumber suits your style and budget. It must be dry and straight.
Brackets use dressed lumber.
4”x4” (3.5”x3.5”) Bracket Cavity is 3.61”x3.61”
6”x6” (5.5”x5.5”) Bracket Cavity is 5.62”x5.62”
Screws
Each bracket requires 2 screws per side/set of eight holes.
1-1/2” Pan Rob/Phil combo drive 304 S.S Wood screws with black plastic head caps are included.
Insert screws in holes closest to the wood.
Hardware to secure to wood is included. Additional screws are available for purchase.
SECTION 1 Building the Top
BUILDING A ‘U’: Insert your lumber into the TRIO brackets. See Figure 1.
BUILDING AN ‘I’: Insert your lumber into the TRIO brackets. See Figure 2.
Secure bracket to lumber with provided screws.
SECTION 2 INSERT THE POSTS
Insert your vertical posts on the first side.
Secure brackets to lumber with provided screws.
SECTION 3 complete
Insert your lumber into side 2 to complete your pergola.
Secure bracket to lumber with provided screws.
Please note: Pergolas with the Waterproof Wing top should be built in a cube, or anchored into the ground to prevent the legs from warping over time.
Anchor to your surface. Remember Anchoring hardware is NOT included as surfaces will vary from build to build. A local building supply retailer will be a helpful resource.
SECTION 4 Attaching the WATERPROOF WING TOP
Attach corner mounts to the 2 flat corners. See Figure 4.
Attach buckles. With buckles facing the sky, loop strap around corner mounts, secure with buckle, and pull tight.
SECTION 5 complete
Secure bracket to lumber with provided screws.
Attach the 2 square corner edge mounts 18” down from the bottom of the corresponding TRIOs on the inner corner edge of the vertical post. See Figure 5.
Loop strap around side mounts, secure with buckle, and pull tight.
Line up side mounts to the side buckles on Batwing SHADE SAIL. See Figure 5.
Loop strap around side mounts, secure with buckle, and pull tight.
Anchor to your surface. Remember Anchoring hardware is NOT included as surfaces will vary from build to build. A local building supply retailer will be a helpful resource.